Application Field
The Solar Airport Taxiway Light ENET-LS-E provides essential guidance for helicopters operating across various helipad types, including surface, elevated, and shipboard locations. Specifically, this light directs and warns aircraft to ensure safe take-off and landing procedures.
Product Introduction
This fixture functions as a Heliport Approach Light by emitting a sequential flashing white light. Its primary role is to guide aircraft during final approach and clearly indicate the landing direction to pilots. Typically, installation crews place these lights along the designated approach path, just outside the airport’s main perimeter lighting. Furthermore, the system design allows for flexible single-side or bilateral installation. For correct operation, a minimum set of five lights must flash in sequence, starting from the outermost point and moving inward.
Main Features & Characteristics:
Durable Construction & Materials
The lens cover uses durable PC material and includes an anti-perching spike. As a result, it offers excellent impact strength along with strong corrosion, UV, and heat resistance. Additionally, the lamp base combines lightweight aluminum alloy with SUS304 stainless steel and features a powder-coated finish, ensuring superior waterproofing and corrosion resistance.
High-Performance Lighting & Safety
For illumination, an imported cold cathode xenon tube serves as the light source, delivering high brightness (up to 100 Lm/W), low power consumption, and a flash cycle life of up to 100 million cycles. Moreover, the built-in surge protection device withstands severe lightning strikes (In 7.5KA/5 times, Imax 15KA), which makes the light reliable even in harsh climates. Furthermore, its breakaway/frangible design effectively prevents secondary damage to helicopters in case of impact.
Convenient Maintenance & Customization
The plug-in installation method for the light source allows for simple and safe maintenance. Consequently, the light operates stably with low long-term costs. Finally, the system can integrate with a dedicated controller for remote operation if required. The standard power lead wire measures 1.5m, and you can request a custom length.
Product Parameter Table:
Installation & Usage Instructions
Please follow these steps to ensure proper installation:
1. Mount the Light
First, fix the light securely and horizontally at your chosen location using four M10 expansion bolts.
2. Verify the Power Supply
Before you connect any wires, confirm that the power supply voltage matches the light’s rated voltage.
3. Connect the Wires
Next, connect the power wires and the ground wire correctly by following the labels on the cable.
4. Final Check & Power On
After you finish wiring, check all connections. Then, turn on the power to start normal operation.
